Skip to main content

Asbestos Removal and Abatement Services in Manitoba

If your property contains asbestos, you need a licensed team to handle it safely. We manage the entire process from initial assessment and material sampling through to final clearance testing.

Is Your Property at Risk?

If your building was constructed before 2002, there's a real chance asbestos-containing materials are present. It was used in a wide range of building products, including:

  • Insulation on pipes, boilers, and ductwork
  • Floor tiles and the adhesive underneath them
  • Ceiling tiles and textured ceiling coatings
  • Roofing shingles and felt
  • Drywall compound and joint tape
  • Exterior siding (such as Transite board)
  • Fireproofing materials

These are just some of the most common examples. Asbestos was used in hundreds of different building materials, so even if you don't see it in these specific items, it may still be present elsewhere in your property.

You often can't tell just by looking at it. The only way to know for sure is to have a professional assessment done.

Don't Wait Until It's a Problem

Knowing when to act is just as important as knowing who to call. These are some of the most common situations where asbestos removal is required:

Renovation or Demolition

If you suspect materials may contain asbestos, you're required by Manitoba regulations to have those materials assessed and properly removed before work begins.

Property Sale or Purchase

Buyers and lenders increasingly require hazardous material inspections. Getting ahead of this protects your deal and your liability.

Visible Damage

If asbestos-containing materials are crumbling, cracking, or otherwise deteriorating, fibers can be released even without any construction activity. This needs to be addressed right away.

Our Process

How We Handle Asbestos Removal

We follow a clear, structured process on every job. Here's what to expect when you work with us:

1. Assessment and Testing

We start by inspecting your property and collecting samples of suspect materials. Those samples are sent to an accredited lab for analysis. You get a clear report of what's present and where.

2. Project Planning

Once we know what we're dealing with, we put together a removal plan that outlines the scope of work, safety measures, and timeline. We walk you through it before anything starts.

3. Containment

Before removal begins, we seal off the work area using polyethylene sheeting and negative air pressure units equipped with HEPA filters. This prevents fibers from spreading to other areas of your property.

4. Safe Removal

Our certified workers remove asbestos-containing materials following strict provincial guidelines. We use proper personal protective equipment and follow safe work procedures throughout.

5. Disposal

All asbestos waste is bagged, labeled, and transported to a licensed disposal facility in accordance with Manitoba regulations. Nothing is left on site.

6. Post-Removal Testing

Once the work is complete, we conduct air quality testing to confirm that fiber levels are within safe limits. You get documentation showing your property has been cleared.